Services

Your idea, designed and built.

Small parts, enclosures, brackets, fixtures and one-offs, modeled to fit, printed in the right material, and refined until it works.

CAD design & modeling

Production-ready models in Autodesk Fusion, from a sketch, a photo or rough dimensions. You get the files.

Rapid prototyping

Fast iterations on Bambu Lab printers, in multiple colors and materials. Hold it, test it, fix it before you commit to tooling.

Engineering-grade parts

High-temp, fiber-reinforced materials like ABS-CF, PA6-GF and PPA-CF, already used for automotive prototype components.

2D drawings & as-builts

Floor plans and as-built drawings for buildings and offices, backed by years of work for property managers across Atlanta.

Materials: PLA, PETG, ABS, ASA and TPU for everyday parts, plus engineering grades like ABS-CF, PA6-GF and PPA-CF when a part has to take heat, load or chemicals. Not sure what you need? Picking the right material is part of the job.

No minimum job size · Initial designs quoted per job · Changes & updates billed hourly

How it works

  1. Step 1: Send it over

    A sketch, photo, measurements, or existing STEP/STL files.

  2. Step 2: I model it

    You get a quote for the initial design, then renders to review.

  3. Step 3: Print & test

    A physical prototype in the material that fits the job.

  4. Step 4: Refine & deliver

    Tweaks until it's right. Final parts, files, or both.

Recent work

Recent builds

Case study

Fox Body dash kit: redesign

A shop's failed radio and climate panel, re-engineered to fit flush and stay put.

Before · original kit
After · 80D redesign

The problem

A shop brought me a radio and climate dash kit made by someone else. It didn't fit the console, had no real way to attach, and fell out while driving.

The fix

I redesigned the panel in Fusion and 3D-printed templates to verify the fit and measure mounting depths. The final part is printed in ABS-CF for strength and heat resistance, with the AC controls relocated properly and four 15 × 4 mm neodymium magnets holding it in place.

The result

A flush, factory-looking panel that stays put and can still be pulled out for service.

  1. Original kitGaps along the console edges; no retention.
  2. Redesign in FusionNew panel modeled to the console.
  3. Magnet mountsFour bosses for 15 × 4 mm magnets.
  4. Fit templatesPrinted templates check fit and depth.
  5. InstalledFinal ABS-CF panel, flush to the dash.
  6. DoneRadio and AC controls, factory-style.
  • ABS-CF
  • 4 × Ø15 × 4 mm neodymium
  • Autodesk Fusion
  • Template-verified fit

Get a quote

Let's build it.

Tell me what you need. The more you send, the faster and tighter the quote.

  • Sketches, photos or a part to match
  • Key dimensions and tolerances
  • Where it'll live: heat, load, outdoors?
  • Quantity and timeline

Have sketches, photos or STEP/STL files? Mention them and I'll reply with an email you can send them to.